OpenCom 130
The modular ISDN PBX of the OpenCom 100-series
The OpenCom 130 modular offers as a member of the successful OpenCom 100 family, beside its entire feature- and functional content, with the modularity a further significant customer-driven solution. The basic system is an ideal answer to an entry demand for a private household or an office. The modularity of OpenCom 130 enables the individual step-up to actual requirements as well as providing an increase in capacity for growing communicational demands.
Pending on the used modules, the OpenCom 130 modular supports the use of up to 19 UPN- or respectively up to 28 a/b-ports. The maximum capacity of the system reaches up to 84 ports. Should this not be enough, OpenCom 130 modular can be cascaded with one of the other OpenCom 100 systems for further size-increase.
Features
 |
- Complete DECT radio network coverage (the RFP 22 and RFP 24 base stations can be installed up to a kilometre away from the system)
- integrated IP router
- cordless and corded system telephones
- Voice over IP, softgateway with 4 IP <-> NonIP chanels
- networking of sites via Q.SIG and Q.SIG over IP (optional)
- trunk bundling (eight bundles, four routes)
- differentiation between business and private calls
- WAV file can be loaded for music on hold
- two- to five-digit telephone number plan
- network CAPI
- team, manager/secretary and serial system functions
- integrated voicemail with pre-announcement feature (optional)
- auto attendant (optional)
- multi-tenant variant (optional)
|
Terminal interfaces
Modules for the basic system:
- Extension Set 130
The Extension Set 130 includes three slots for stacking modules and LAN-connections for cascading and to the network (10/100).
- M100-TFE
Supplies the actors and sensors for connecting a door intercom system. There are 3 sensors for doorbells available.
- M100-V.24
Supplies a V.24-interface to the system e.g. for connection of a printer for tariff charges.
- PRI-module (S2M)
Upgrades the system with a primary rate interface connection.
Modules for the Extension Set 130:
- M100-U4d and M100-U8d
Upgrades the system by 4- or 8 UPN-system interfaces respectively for connecting the system telephones Openphone 52 and the OpenPhone-60-range or the DECT-base stations RFP 2X. Stackable on slot 1 and 2
- M100-A4 and M100-A8
Upgrades the system by 4- or 8 CLIP-enabled a/b-ports respectively. Stackable on all 3 slots.
- M100-S4
Upgrades the system by 4 switchable S0-ports. Stackable on slot 1 and 2.
- M100-S2U6d
Module with 2 switchable S0-ports and 6 UPN-system interfaces for connecting the system telephones Openphone 52 and the OpenPhone-60-range or the DECT-base stations RFP 2X. Stackable on slot 1 and 2.
- M100-S2A6
Module with 2 switchable S0- and 6 CLIP-enabled a/b-ports. Stackable on slot 1 and 2. .
Peripheral units & accessories:
- System telephone OpenPhone 52
- System telephone OpenPhone 61
- Team telephone OpenPhone 63
- Feature telephone OpenPhone 65
- Auxiliary unit for OpenPhone 65 with 3x10 short code- and functional keys
- RFP 22 - Indoor-DECT-radio base station
- RFP 24 - Outdoor-DECT-radio base station with external antennas
- RFP 32 IP - Indoor DECToverIP rado base station
- RFP 34 IP - Outdoor-DECToverIP-radio base station with external antennas
- RFP 41 WALN - DECToverIP/WLAN radia base station
- OpenPhone 26, OpenPhone 27, OpenPhone 28 - cordless DECT-system telephones
- OpenCTI 50 (release key) - CTI-application
- OpenVoice 200 (release key) - Integrated voicemail
- OpenAttendant 205 (release key) - Integrated auto-attendant
- OpenCompany 45 (release key) – Multi-company use
- OpenHotel 20 or OpenHotel 100 (release key) - hotel application
- Cascading set for linking one OpenCom 130 system with another OpenCom 130 system (optional)
Connections
|
